Follow Us: iconfinder 5365678 fb facebook facebook logo icon 64px   iconfinder 5296765 camera instagram instagram logo icon 64px   iconfinder 5296516 tweet twitter twitter logo icon 64px   youtube 64px



Visit our Members Gallery to view the many fine pieces built by SAPFM members. Many are museum reproductions. We hope that among these many masterworks you will find inspiration for your next build.



Visit the Gallery




Phil Lowe

Woodworker and Friend



As most of us know PhiL Lowe was a longtime SAPFM member, 2005 Cartouche Award recipient, teacher to countless students, mentor and friend to many of us.

It is with great honor and privilege that the Board of Directors at SAPFM is announcing the support of preserving the Phil Lowe drawing library .

Visit the Library >>


American Period Furniture Throughout the Decades


Enjoy the Many Benefits of SAPFM Membership

Members enjoy the following benefits.

  • A subscription to our annual American Period Furniture Journal mailed each December
  • A subscription to our quarterly Pins & Tails e-magazine.
  • Participation in all local chapter events
  • Eligibility to attend SAPFM confrences and particapte in SAPFM exhibitions
  • Access to on-line resources including our library of articles, past issues of Pins & Tails e-magazine, and more
  • An online gallery where Members' work is displayed
  • Our online Members forum

See More >>

BY JEFF THOMPSON April 1, 2021 Updated April 1, 2021

There are number of ways one can thickness stringing and bindings. I’ve used a couple methods myself like on a drum sander, but mine is in a shed out back behind my shop and the lights dim when I turn on the machine. Obviously it's time for a bigger, more powerful shop. I’ve also used the down and dirty way that Glen Huey showed me. You clamp a fence to the table of your Rigid oscillating sander and creep up on the thickness that way. Then one afternoon I was watching a Steve Latta video probably for the third time and noticed he said something about the Luthier’s Friend. So, I googled it and this is where it led me: http://www.luthiersfriend.

luthiers friendThe Luthier’s Friend is the brain child of Ken Picou of Ken Picou Design. He is the inventor of the Robo Sander which is one of the core parts of the Luthier’s Friend. The Robo Sander is a rubber drum with various grits of sanding sleeves that can be installed on it. The drum is mounted on an arbor that chucks into your drill press. You might say “what’s new about that?” but the bottom of the arbor has a bearing on it that is the same size as the drum and that fits into a hole in the bottom of the base of the Luthier’s Friend. That is important because it helps to keep the drum parallel to the fence and square to the base and thereby keeps the banding flat.

In the photos you see at the back of the Friend, there’s a small adjustment knob that sits behind a little fence. On top of that fence is a knurled brass lock down nut. You must lock that nut down to secure the fence for the adjustment knob prior making ANY adjustments. There is a spring between the small fence and the larger fence near the sanding drum. There are two more knurled lock down nuts on top of this larger fence. The spring is around the axle of the adjustment knob and if you loosen the two nuts on the bigger fence a little bit, then turn the adjustment knob counterclockwise, the larger fence will advance toward the sanding drum enabling you to trim your banding or stringing to a lesser thickness. If you turn the adjustment knob clockwise, you increase the distance between the drum and the fence.

2103PnT JT 02In my trial, I turned the micro adjustment knob by a quarter of a turn counter clockwise and took my banding down by 1/64” as measured with a dial caliper. You can turn the micro adjustment knob in the back to move less than 1/64”. If you’re trying to fill an excavation for stringing that measurement can be quite significant. You must remember to lock down the two knurled nuts on the big fence after making any adjustments but that comes quickly after you forget it a few times.

I should mention that it’s eco friendly too. I was so excited to hook it up and try it out that I did not take the time to bring the shop vac over to the unit. A shroud for the drum is included that has a two-inch dust port built into the body. There is always a lot of dust involved in this process, so you want to be sure to have a vacuum system available to do the dirty work and take any other precautions you deem appropriate for this type of work. If you are serious about your stringing and banding this helps you dial the thickness in accurately.

Editors Note: This article first appeared in the SAPFM Pins and Tails Magazine, Spring 2021

Upcoming Events


New Articles

  • Fitting an Asymmetrical Splat Into an Oval Chair Back

    BY DAVE HELLER April 1, 2021 Updated: April 1, 2021 This article discusses a specific aspect of making a set of not-yet-completed Bing-style Art Nouveau dining room chairs of my own design. I will write an article for SAPFM on...

  • A Standup Davenport Computer Desk

     BY JOE PARKER April 1, 2021 Updated: April 1, 2021 The name "Davenport" comes from a reference in the records of an 18th-19th century English furniture maker Gillows. The reference, in about 1795, gives the original design and...

  • Remembering Phil Lowe: Craftsman, Mentor, Friend

    BY MICKEY CALLAHAN April 1, 2021 Updated April 1, 2021 It’s with a heavy heart that I write of the passing of one of America’s master period furniture makers, Phil Lowe. I’ve known Phil for over 30 years and was privileged to have...

  • Luthier's Friend To Thickness Small Part

    BY JEFF THOMPSON April 1, 2021 Updated April 1, 2021 There are number of ways one can thickness stringing and bindings. I’ve used a couple methods myself like on a drum sander, but mine is in a shed out back behind my shop...

  • Mirka Hand Sanding System

    BY BOB LANG April 1, 2021 Updated April 1, 2021 I can develop a pretty smooth surface with a hand plane and/or a scraper, but before finishing I sand to ensure that all the surfaces of a project are consistent. Each hand...

Cartouche Award

  1. The Award
  2. Guidelines
  3. Cartouche Recipients


  1. SAPFM Business Member Directory
  2. Our Sponsors


  1. American Period Furniture
  2. Pins & Tales Magazine