- Makers Challenge 2023
- Chest
Chest
RA
Ronald Aylor
Updated
379 0 2 1
Makers Challenge
Maker
Ron Ayler
Entry Number
23.
Entry Category
Intermediate
New SAPFM Member less than one year. No electricity in shop, not even for lights. All hand work only.
I like visiting the websites of antique furniture dealers. In searching six-board chests, two examples caught my eye. The first was an ornately carved 17th-century Gloucestershire chest. The second was an Elizabethan boarded chest, circa 1550-1570, with a canted front. Drawing inspiration from the two extant chests I chose to proceed with my version in Cherry.
With two wide cherry boards in my lumber store, my dimensions were based on the wider of the two boards. I first cut out a lid, 41-1/2-inches long by 15-1/2-inches wide. The height of the chest is 23-1/4-inches. The front, sides, and lid are of Cherry. The back and bottom are of Poplar. Two pine tills support the lid when open.”
I like visiting the websites of antique furniture dealers. In searching six-board chests, two examples caught my eye. The first was an ornately carved 17th-century Gloucestershire chest. The second was an Elizabethan boarded chest, circa 1550-1570, with a canted front. Drawing inspiration from the two extant chests I chose to proceed with my version in Cherry.
With two wide cherry boards in my lumber store, my dimensions were based on the wider of the two boards. I first cut out a lid, 41-1/2-inches long by 15-1/2-inches wide. The height of the chest is 23-1/4-inches. The front, sides, and lid are of Cherry. The back and bottom are of Poplar. Two pine tills support the lid when open.”